Built with Vitaro
From alpine rooftops to waterfront plazas, Vitaro adjustable pedestals carry decks, terraces and paved surfaces on five continents. Explore how each project was specified — and how the same logic applies to yours.
Challenge: A sloped concrete roof with a fragile waterproof membrane and strict fall protection — no penetrations allowed.
Solution: HE Series pedestals with 5° self-leveling heads bridged the fall, lifting porcelain pavers on a fully ventilated, re-levelable grid. Zero membrane cuts.
Challenge: An irregular villa terrace around a pool needed a level, slip-resistant stone surface over an uneven existing slab.
Solution: HE Series with self-leveling heads delivered a dead-level 20 mm stone build-up, keeping the waterproofing and pool plant fully accessible.
Challenge: A lakeside build needed a ventilated timber deck above a damp substrate, on a distributor budget.
Solution: B Series pedestals carried the joist grid at 20–260 mm, up to 3,500 kg per unit — the best load-to-cost ratio in the range.
Challenge: A high-footfall plaza over a podium deck required a thin, level stone build-up with easy access to services below.
Solution: F Series low-profile pedestals (20–185 mm) supported large-format pavers on a serviceable void — re-levelable without lifting the whole deck.
Challenge: A landscape walkway crossed gently graded ground and had to stay open for inspection of drainage and cabling.
Solution: HE Series pedestals gave a stable, adjustable walking surface with a clear service void — tool-free height changes as the grade shifted.
Challenge: A residential rooftop wanted a warm WPC-composite surface over a low void with limited build-up height.
Solution: B Series pedestals held the WPC joist grid level and ventilated, with 100/150 mm extenders available for future height changes.
Send your height, area and slab type — we'll recommend the right series and quote FOB/CIF within 24 hours.
VitaroUNO INDUSTRIAL